Hioki MR8827, Инструкция по эксплуатации

Страница: 100 / 436

95
Load Data
Batch Load of Waveform Data
When the following index files are loaded, waveform data can be loaded as a batch. With the following
settings, index files are created along with waveform files.
Extension Explanation
IDX Divided files are loaded together.
(To create index files, use [Division] on the [File Save] sheet of the System screen to set the
dividing size before saving. Note: If [Save type] is not [Wave Binary] , index files will not be
created)
Refer to “5.2.2 Automatically Save Waveforms” (p. 82) or “5.2.3 Save Data Selectively (SAVE Key)”
(p. 88).
SEQ (When using the memory division function of the memory function)
Waveform data of all blocks is loaded together.
(To create index files, set [Memory Div] to [On] on the [Memory Div] sheet of the Status Screen,
and then, set [Save Type] to [ALL-Wave Bin] on the [File Save] sheet of the System Screen.)
Refer to “12.1 Recording Settings” (p. 239) or “5.2.3 Save Data Selectively (SAVE Key)” (p. 88).
Load a Waveform Evaluation Area
Files with the following two extensions can be loaded:
Extension Explanation
ARE Loads waveform evaluation areas and settings data
(Files saved by selecting [Area settings] when saving the data).
BMP Loads waveform evaluation areas.
(Files saved by selecting [Area image] when saving the data can be edited on a PC and then loaded
back into the instrument.)
Data Loading for Waveform Generation (Registration)
You can load data for generated modules.
Data loading is performed on Signal generator sheet of Channel screen ( CHAN key) or FILE screen ( FILE
key).
For details, see the instruction manual of Models U8793, MR8790, and MR8791.
Extension Explanation
WFG,
TFG
Loads waveform evaluation areas and settings data
(Files saved by selecting [Area settings] when saving the data).
Refer to
“8.11 Register the Waveform in the U8793 ArbitraryWaveform Generator Unit” (p. 182)
PLS The data for pulse pattern generation is loaded in channels of a specified arbitrary wave
generator module.
The pulse pattern waveform loaded (registered) is output from Model MR8791 Pulse Generator
Unit.
FGP
The waveform generation program file is loaded in channels of a specified arbitrary waveform generator
module.
5
Save/Load Data and Manage Files