Hioki 3504-40 C HiTester, Инструкция по эксплуатации

Страница: 242 / 292

8.9 Message Reference
236
Setting and Query of Measurement Range
Syntax Command
Query
Response :RANGe
<Numeric Value>
:RANGe?
<Numeric Value>
<Numeric Value> = 1 to 10 (NR1)
Explanation
Command Sets the measurement range.
A numeric value in NRf format is accepted but decimals are rounded
off so the numeric value can be handled.
If this command is executed, the setting of the :RANGe:AUTO com-
mand is automatically changed to OFF.
If this command is executed when the setting of the equivalent circuit
is set to AUTO, the setting (SER/PAR) of the equivalent circuit is auto-
matically changed to the optimal setting.
Query Returns the setting of the measurement range as an NR1 value from
1 to 10.
Example
Command :RANGe 5
Sets the measurement range to 5 (200 nF) (when 1 kHz).
Query
Response
:RANGe?
:RANGE 5
(when HEADER ON)
5
(when HEADER OFF)
The measurement range is set to 5 (200 nF) (when 1 kHz).
Note
Numerical Value
(Range Number) Measurement Frequency
120Hz
1kHz
1 200 pF 20 pF
2 2 nF 200 pF
3 20 nF 2 nF
4 200 nF 20 nF
5 2

F 200 nF
6 20

F 2

F
7 200

F 20

F
8 0.7 mF (when 1 V),
1.45 mF (when 500 mV, 100 mV) 70

F (when 1 V),
170

F (when 500 mV, 100 mV)
9 2 mF 200

F
10 20 mF 2 mF