Hioki 3504-40 C HiTester, Инструкция по эксплуатации

Страница: 144 / 292

8.3 Connection and Setting Procedures
138
5.
Use or to select a setting item.
6.
Press to confirm the terminator.
After confirmation, "LoAd_A(C/h)" (Panel load screen) is displayed at the top of
the MAIN display area.
The interface communication conditions are not confirmed unless is
pressed.
7.
Press .
The unit returns to the measurement mode it was in prior to the menu items
being displayed.
• If "IF.GPib" was selected (for using the GP-IB interface)
(only for Models 3504-50, 3504-60):
1. Use the numeric keypad or and to set an address (0 to 30) and
then press to confirm the address.
2. Use or to set the terminator.
“LF”........ :LF with EOI
“CrLF”.... :CR+LF with EOI
(Pressing
or switches between “LF”

“CrLF”.)
• If "IF. rS" was selected (for using the RS-232C interface):
1. Use or to set a baud rate (9600, 19200) and then press
to confirm the baud rate.
2. Use or to set the terminator.
“Cr” ........ :CR
“CrLF”.... :CR+LF
(Pressing
or switches between “Cr”

“CrLF”.)