Hioki 3504-40 C HiTester, Инструкция по эксплуатации

Страница: 178 / 292

8.9 Message Reference
172
Refer to the following on how to read this section.
8.9 Message Reference
Setting and Query of Measurement Signal Level
Syntax Command
Query
Response
:LEVel
<Numeric Value>
:LEVel ?
<Numeric Value>
<Numeric Value>
=1/ 0.5/ 0.1 (only for
Model 3504-60) (NR2)
1: 1 V, 0.5: 500 mV, 0.1: 100 mV
Explanation Command Sets the measurement signal level.
A numeric value in NRf format is accepted
but non significant digits are rounded off so
the numeric.
Query Returns the setting of the measurement sig-
nal level as an NR2 numeric value.
Example Command :LEVel 0.5
Sets the measurement signal level to 500
mV
Query :LEVEL?
:LEVEL 0.5
(when HEADER ON)
0.5 (when HEADER OFF)
The measurement signal level is set to 500
mV.
Indicates the content of the
command.
Describes the syntax of the
message.
Provides an explanation of
the command data section
or response data.
Provides an explanation of
the message
Shows an actual example of
using the command.
This explanation is normally
for when HEADER ON. (Ex-
cept for HEADER com-
mand.)
This indicates whether the command message format has a numeric
value or character parameter.
<Numeric Value>
Numeric Value Parameter
(NR1) Integer
(NR2) Fixed Point
(NR3) Floating point
(NRf) Format including all of NR1, NR2, and NR3
<Character> Character parameter
<Content to input>
3504-40
3504-50
3504-60
Command/query (message)
Response (message)