Hioki 3504-40 C HiTester, Инструкция по эксплуатации

Страница: 70 / 292

5.1 Comparator Function
64
Measurement
method 1 Make settings using the upper limit and lower limit
values (count setting).
(To make settings using a reference value and the upper limit and lower limit val-
ues refer to "Measurement method 2" (p. 82))
1.
Press to light up COMP and enter comparator measurement
mode.
2.
Press .
3.
Press to enter "C" upper limit value setting mode.
4.
Input the C upper limit value using the arrow keys or the numeric
keypad.
Settable Range : OFF, -199999 to 999999 (When setting to "OFF" (p.72))
Move to the digit ........
and
Change the number .. and
Setting a value lower than the lower limit value will not produce an error, but
accurate judgment will not be possible.
At time of shipment, it is set to ” - - - - - - ” (OFF).
(
Light up
)
To make settings from an optional setting
mode, press
while ”C” or ”d” is flashing
to select the setting mode, then press
.
Setting modes : C upper limit and lower limit
values
 D upper limit and lower limit values
 C upper limit and lower limit values…
(SUB display area)
Flash
Flash
(SUB display area)
Upper limit values
Light up