Hioki 3504-40 C HiTester, Инструкция по эксплуатации

Страница: 226 / 292

8.9 Message Reference
220
Setting and Query of Header for Response Messages
Syntax Command
Query
Response
:HEADer
<ON/ OFF>
:HEADer?
<ON/ OFF>
Explanation Command Sets whether there is a header for response messages.
This is initialized to OFF when the power is turned on.
Query Returns ON or OFF for the header setting of response messages.
Example Command
:HEADer ON
Sets a header to be added to response messages.
Query
Response
:HEADer?
:HEADER ON
(when HEADER ON)
OFF
(when HEADER OFF)
A header is set to be added to response messages.
Setting and Query of Delay time for Judgement Result Output and EOM
Output Period in EXT I/O
Syntax
Command
Query
Response :IO:OUTPut:DELay
<Numeric Value>
:IO:OUTPut:DELay?
<Numeric Value> = 0 to 0.9999 (NR1)
Explanation
Command Sets delay time comparator and the BIN judgement result

EOM
period.
A numeric value in NRf format is accepted but non significant digits
are rounded off so the numeric.
Query Returns the setting of delay time comparator and the BIN judgement
result

EOM period as charaters.
Example Command
:IO:OUTPut:DELay 0.0005
Sets delay time comparator and the BIN judgement result

EOM
period to 500

s.
Query
Response :IO:OUTPut:DELay?
:IO:OUTPUT:DELay
0.0005
(when HEADER ON)
0.0005
(when HEADER OFF)
Delay time comparator and the BIN judgement result

EOM period
set at 500

s.
Note
There is an approximate error of 160

s in the delay time entered for
comparator and the BIN judgement result

EOM period for the set-
ting value.
As the delay time will vary greatly when activating the trigger from EXT
I/O during measurement, or when communicating during interface, as
far as possible, try not to control externally during measurement.