Hioki 3504-40 C HiTester, Инструкция по эксплуатации

Страница: 227 / 292

8.9 Message Reference
221
8
Setting and Query of Output of Judgment Result Signal Line in EXT I/O
Syntax Command
Query
Response :IO:RESult:RESet
<Character>
:IO:RESult:RESet?
<Character> = ON/ OFF
ON : Resets the judgment results when the start-of-measurement
signal (trigger signal) is input.
OFF : Updates the measurement results when measurement ends.
Explanation
Command Sets whether to reset the judgment result signal line in EXT I/O.
Query Returns the setting of whether to reset the judgment result signal line in
EXT I/O.
Note
The judgment result signal line indicates judgment results for C or D-
HI, C or D-IN, and C or D-LO for comparator measurement and judg-
ment results OUT-OF-BINS, D-NG, BIN1 to BIN14 for BIN measure-
ment, and error (CV error, Low C error, level detected error, contact
error).
See
7.1 "About the EXT I/O Connector" (p. 123)
Example
Command :IO:
RESult:RESet OFF
Sets the judgment results to be updated when measurement ends.
Query
Response :IO:
RESult:RESet
?
:IO:
RESULT:RESET OFF
(when HEADER ON)
OFF
(when HEADER OFF)
The judgment results are set to be updated when judgment ends.