Hioki 3504-40 C HiTester, Инструкция по эксплуатации

Страница: 182 / 292

8.9 Message Reference
176
Reading and Clearing of Standard Event Status Register (SESR)
Syntax Query
Response
* ESR?
<Numeric Value>
<Numeric Value> = 0 to 255 (NR1)
Explanation
Returns the SESR content as an NR1 numeric value from 0 to 255, and then
clears that content.
No header is added to the response message.
Example
Query
*
ESR?
Response
32
Bit 5 of SESR is 1.
Note
Bit 6 and bit 1 are not used in the unit.
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
PON URQ CME EXE DDE QYE RQC OPC
Reading and Writing of Service Request Enable Register (SRER)
Syntax
Command
Query
Response
*
SRE
<Numeric Value>
*
SRE?
<Numeric Value>
<Numeric Value> = 0 to 255 (NR1)
Explanation Command Sets the mask pattern of the SRER to a numeric value from 0 to 255.
A numeric value in NRf format is accepted but non significant digits
are rounded off so the numeric.
The values of bit 6 and the unused bit (bit 7) are ignored.
The value is initialized to 0 when the power is turned on.
Query Returns the SRER content set by the *SRE command as an NR1
numeric value from 0 to 255.
The values of bit 6 and the unused bit (bit 7) are always 0.
Example
Command
*
SRE 34
Sets bit 5 and bit 1 of SRER to 1.
Query
Response
*
SRE?
* SRE 34
(when HEADER ON)
34
(when HEADER OFF)
Bit 5 and bit 1 of SRER are 1.
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
Unused
X
ESB MAV ESB3 ESB2 ESB1 ESB0