Hioki 3504-40 C HiTester, Инструкция по эксплуатации

Страница: 201 / 292

8.9 Message Reference
195
8
Setting and Query of Reference Value and Upper Limit and Lower Limit Val-
ues of Second Parameter for Comparator Function in Deviation Percent Mode
Syntax Command
Query
Response :COMParator:SLIMit:DEViation
<Reference Value>
,
<Lower
Limit Value>,<Upper Limit Value>
:COMParator:SLIMit:DEViation?
<Reference Value>,<Lower Limit Value>,<Upper Limit Value>
<Reference Value> = -199999 to 199999(NR1)
<Lower Limit Value> = OFF/ Numeric Value from -199999 to 199999 (NR1)
<Upper Limit Value> = OFF/ Numeric Value from -199999 to 199999 (NR1)
Explanation Command Sets the reference value and upper limit and lower limit values of the
second parameter in deviation percent mode.
A numeric value in NRf format is accepted but non significant digits
are rounded off so the numeric.
Query Returns the reference value and upper limit and lower limit value set-
tings for the second parameter in deviation percent mode in order of
reference value, lower limit value, and upper limit value.
Example Command
:COMParator:SLIMit:DEViation 2000,-5,5
Sets 2000 for the reference value, -5 for the lower limit value, and 5
for the upper limit value of the second parameter in deviation percent
mode.
Query
Response
:COMParator:SLIMit:DEViation?
:COMPARATOR:SLIMit:DEVIATION 2000,-5,5
(when HEADER ON)
2000,-5,5
(when HEADER OFF)
2000 is set for the reference value, -5 is set for the lower limit value,
and 5 is set for the upper limit value of the second parameter in devia-
tion percent mode.
Note
The measurement value for the second parameter in deviation per-
cent mode is the result of the calculation (measurement value - refer-
ence value).