GSK 988T, Руководство пользователя

Страница: 279 / 416

Chapter
Ⅴ
Manual Operation
265
Ⅱ
Operation
1. Press and it is one of the mode selecting switches;
2. To decelerate, press one of the rapid traverse override switches ;
3. Press the feeding axis corresponding to the reference position return and ,
execute the reference position return. The tool traverses to the deceleration point at the rapid
traverse speed and then traverse to the reference position at FL speed set by parameter. After the
tool returns to the reference position, the reference position return finish indicator (LED)
is on;
4. Execute the same operations for the other axes.
Note 1: Manual reference position return can only return to the 1
st
reference position; after the manual
reference position return finishes, the coordinate system is auto set.
Note 2: Once the reference position return finishes, “reference position return finish” indicator is on, the
machine doesn’t move anymore until the reference position return switch is cut off.
Note 3: When “reference position off” or “during emergency stop”, the reference position return finish
indicator is off.
Note 4: The direction for each axis reference position return is set by the 5
th
bit of parameter #1006.
Note 5: Setting the 2
nd
bit of parameter 1404: After set the reference position, manually return to reference
position, and moves to the reference position at the rapid feedrate or manual rapid feedrate.
Note 6: After the system reference position of the absolute encoder is set, auto set the coordinate system
after power on again, and it doesn’t require reference position return. But the non-absolute
encoder system requires executing the reference position return after power on again.
The above is just one example; refer to the manual provided by the machine manufacture during
the actual operation.
5.2 Manual Feed
In Manual mode, press the feeding axes and direction selection switches on the machine panel,
the machine moves along the selected axis.
Each axis manually continuous feedrate is set by parameter (#1423), and each axis manual
continuous feedrate can be adjusted through manual continuous feedrate override dial.
Feedrate dial
Press and the machine moves at the rapid traverse speed set by #1424 parameter, no
matter where is JOG feedrate override dial, and the function is called the manual rapid traverse.