GSK 988T, Руководство пользователя

Страница: 30 / 416

GSK988T Turning CNC System User Manual
16
Ⅰ
Programming
N0040 W-30 F200; (Cutting from B point to C point)
N0050 X80 W-20 F150; (Cutting from C point to D point)
N0060 G0 X100 Z50; (Rapidly retracting to A point)
N0070 T0100; (Canceling the tool offset)
N0080 M5 S0; (Stopping the spindle)
N0090 M9; (Cooling OFF)
N0100 M13; (Releasing workpiece)
N0110 M30; (End of program, spindle stopping and Cooling OFF)
The tool leaves the path of A → B → C → D → A after the above-mentioned programs are executed.
A program consists of a sequence of blocks, beginning with “OXXXX”(program name)and
ending with “%”; a block begins with block number (omitted) and ends with “;” or “*”. See the general
structure of program as Fig. 1-10:
Fig. 1-10 Structure of a program
1.5.1 Program name
Format: ○
△△△△
Program number (0000
～
9999, the leading zero can be omitted
）
Address O
is number of a program name, its range is 4
△△△△
-digit integer 0000
～
9999, the system
alarms when the negative program name is input. The system ignores NC commands when program
are edited and other NC commands are edited in the first line.
1.5.2 Block format
1. Format: / N countless words;
△△△△
/
：
skip character. A block can have or not it, generally, it is placed in the initial
position of a program; user can press “SKIP” on the operation panel to
execute the operation when the skip function is valid, otherwise, the
“SKIP” key on the operation panel is valid, i.e. the skip character in the
block is invalid;
N
△△△△△ ：
block number. A block can have or not it; number following N is
△△△△△
5-digit positive integer 00001
～
99999, and the system alarms when the
input number is decimal.
Program annotation
Program
Block number
Block skip character
Program name
Character for end of block
Word
Character for end of block
Block