GSK 988T, Руководство пользователя

Страница: 285 / 416

Chapter
Ⅵ
Auto Operation
271
Ⅱ
Operation
（ 3 ） During resetting, press , the selected program is uploaded into the block area in
the position window and it can be executed, the current window switches into the position window,
which is shown in Fig.6-2:
Fig. 6-2
Note: Only during resetting, the files can be uploaded.
6.1.2 Program running
1. Press to select the auto mode;
2. Press to start the program, and the program auto runs and the cycle starting indicator
is on; while running ends, the indicator is off. When the last block specifies M99, it can return to the
beginning of the program to run the program in cycle after running ends.
3. To stop during running or cancel the memorizer running, there are following methods:
1
）
Stop the memorizer running
Press on the machine operation panel and its indicator is on, while the cycle start indicator is
off. The machine responds as below:
a. When the machine is moving, feed running decelerates till stopping.
b. When pause (stopping) is being executed, the running stops.
c. When M, S and T functions are executed, the running stops after completing M, S and T
functions.