GSK 988T, Руководство пользователя

Страница: 307 / 416

Chapter
Ⅷ
Setting and display graphs Chapter
293
Ⅱ
Operation
（ 5 ） Press or to select the item to be set and press to confirm the
rewriting is completed.
（ 6 ） Repeat the above operation to set the other parameter.
Note 1: The setting on the window is only for the path display and the display on the graph simulation window.
Note 2: The path display and the graph simulation are executed based on the machine coordinate. When the
path and the graph are not displayed, please modify the coordinate axis offset.
Note 3: The horizontal axis must be Z axis or the aixs which is parallel with Z.
8.2 Path Graph Display and Operation
Through the graph path display, real-time check the path which the tool traverses.
（
1
）
Press to access the graph window;
（
2
）
On the graph window, press to access the path window, display the program
path which is being executed and it is shown as below:
Fig.8-2
At the bottom of the path screen in the figure, it displays the coordinate level of the current path
and the magnification ratio of the path graph. On the top of the figure, it displays the running mode
and the state of the current system. On the right of the screen, it displays the current abosolute
coordinate value, the relative coordinate value and the mode command.
The path graph can be operated as below:
（
1
）
Press or , the path graph can be zoomed out or in, and the
previous ones can be cleared.
（
2
）
Press to clear the screen path.
（ 3 ） Press and the path graph can be restored as the original normal position and
the previous ones can be cleared.