GSK 988T, Руководство пользователя

Страница: 268 / 416

GSK988T Turning CNC System User Manual
254
Ⅱ
Operation
Chapter
Ⅳ
Editing and Managing a Program
On the program window, the program can be created, selected, rewritten, copied and deleted,
also imported and exported.
To prevent the programs are rewritten and deleted by accident, the program switches are set in
GSK988T. Before rewriting the program, the program switches must be on. About the setting of
program switches, refer to chapter 3.4.2.1.
Note: Create a file ‘NCPROG’ in the U disk, take the program into the file. At the moment, the operations in
the U disk cataloge are consistent with those of the local catalog in the program page. Refer to the
operations of local catalog when using the U disk catalog.
4.1 Searching, Creating, Executing and Opening a Program
4.1.1 Searching a program
（
1
）
Press and to enter PROGRAM window shown in Fig. 4-1:
Fig. 4-1
（ 2 ） Press to enter the search window in PROGRAM window.
（ 3 ） Input the program name which is searched in . For example, input
0005, press and the cursor directly skips to the program O0005. For example, the
input does not exist in the CNC, the system at in the lower left corner prompts
.
4.1.2 Creating a program
Only when the operation authority is above level (4), can the program be created and edited.