GSK 988T, Руководство пользователя

Страница: 287 / 416

Chapter
Ⅵ
Auto Operation
273
Ⅱ
Operation
The 4
th
line is skipped when is press to run the program.
6.1.5 G31 skip
When G31 is edit before a block, and the external skip signal(X.3.5)is input during the course of
G31 being executed, G31 running is interrupted to execute the next block. The function is used to the
dynamic measure(such as milling machine) and the toolsetting measure of the workpiece dimension.
Taking example of the 4
th
line of the following program:
O0002
；
G31 Z200 F100
；
When the block is executed and the external skip signal (X3.5) is input, the block
is interrupted and the next block is executed.
G01 X100 Z300
；
……
；
M30
；
Note: The detailed use of G31 is referred to
PROGRAMMING
.
6.1.6 Stop auto running
The memorizer running can be stopped through the following methods: Command stopping or
press the relative keys, which are on the machine operation panel, to stop.
z Command stopping (M00, M01, M02 and M30)
After executing the block with M00 or M01 (the selecting stop button on the panel is on), running
automatically stops, the mode function and the state all are saved. Press , the program
continues to execute. When read in M02 or M30 (command at the end of the main program), the
program running ends and resets.
The operations of different machines are not same; about the details, refer to the manual of the
machine manufacturer.
z
Pressing relatives keys to stop
1. During auto running, press and the machine is shown as below:
（
1
）
Machine feeding decelerates till stopping;
（ 2 ） The mode function and the state are saved;
（ 3 ） Press , the program continues to execute.
2. Press
（
1
）
All axes running decelerates till stopping;
（
2
）
M and S functions output invalid (After pressing , whether auto switch off signals of
spindle CW/CCW, lubricating, cooling, etc is set by the parameter.)
（
3
）
After auto running ends, the mode function is hold.