Chapter
Ⅰ
Programming Fundamentals
3
Programming
Ⅰ
Chapter I Programming Fundamentals
1.1 GSK988T Introduction
GSK988T is exclusive to the slant bed CNC turning machine and turning center with the
horizontal and the vertical structures. It uses 400MHz high-performance process to control 5 feed
axes(including Cs axis) and 2 spindles, communicates with the servo unit through GSK-CAN serial
bus, and its matched servo motor uses the high-resolution absolute encoder to realize
0.1
μ
m
position precision, which can meet the requirements of high-precision turning and milling compound
machining. It has the network interface to support the remote monitor and file transmission and to
meet the network teaching and workshop management. GSK988T is the best choice for the slant bed
CNC turning and turning center.
Fig. 1-1 GSK988T appearance
Technical characteristics
5 feed axes
(
including Cs axis
)
, 3-axis link, 2 analog spindles to realize the turning, milling compound
machining
Command unit 1
μ
m and 0.1
μ
m, max. speed 60m/min
(
max. speed 24m/min in 0.1
μ
m
)
Optional to GSK-CAN servo unit to read/write the servo parameter and monitor servo unit
Extended I/O unit and GSK-CAN axis through serial bus
Nested many PLC programs, on-line editing, real-time monitoring PLC ladder
Part programs edited on the background
Network interface, remote monitoring and file transmission
USB interface, U disc file operation, system allocation and software upgrading
8.4 inch truecolor LCD, two-dimensional motion path and solid graph display
Содержание 988T
