Edirol Direct Linear DV-7DL Pro Скачать руководство пользователя страница 19

Страница: 19 / 372

Names of Things and What They Do

Output connectors

These output video and audio to television

monitors and audio equipment.

Input connectors

These can be used to input video and audio from

video and audio equipment.

AC IN

This is for connecting the AC connector.

MOUSE connector

This is for connecting the mouse.

KEYBOARD connector

This is for connecting the keyboard.

USB connector

This is for connecting the mouse and the DV-

7DLC.

VGA connector

This is for connecting the display.

DV 1 jack

This can be used to connect equipment that has a

DV jack, such as a digital video camera.

In the interest of product improvement, the specifications and/or appearance of this unit are

subject to change without prior notice.

Rear Panel

DV-7DL_PRO_e2.book 19 ページ２００５年１月７日　金曜日　午後１２時２分

Содержание Direct Linear DV-7DL Pro





















































































































































































































































































































































































Результаты поиска

Содержание Direct Linear DV-7DL Pro

Отзывы:

Edirol Direct Linear DV-7DL Pro, Руководство пользователя, Страница: 19 / 372

Результаты поиска

Содержание Direct Linear DV-7DL Pro

Отзывы: