manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 59 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 59

A l u m i n u m   T o p    
S u p p o r t s  

Tools Required

 

     -5/32” Allen wrench 
     -Phillips head screwdriver 
  

NOTE

: The 

Aluminum Top Supports

 are constructed of 

              two die cast aluminum parts and are designed to 
              attach to Enhanced Uprights using front to back 
              tubular stabilizers. 
 
The Aluminum Top Supports

 

can be configured as left hand, 

right hand or center. A center Top Support is required where 
two 36” or 42”  deep worksurfaces meet. See   

Figure 1

. 

  
Based on the quantity of 36”and 42” deep worksurfaces, 
and the configuration being  installed,  assemble the required 
quantity of left hand, right hand and center Top Supports. 
  
1. Fasten the appropriate 

Top Bracket(s) 

to the Top Support, 

    using two #10-24 x 3/8” Socket head cap screws that are   
    provided. See 

Figure 2

. 

 

Please Note:

 If the Aluminum Top Support is to be  used in 

conjunction with

 a 

Worksurface Filler do

 not 

use the Top 

Brackets supplied with the Top Support. Use the 
replacement Top Brackets supplied with the Worksurface 
Filler.

 

 
    On left and right hand supports, install the appropriate  
    

Plastic Insert 

into the recessed area on the side opposite 

    the Top Bracket. 
  
    

Do not

 install the 

Clamps

 at this time. 

  
2. Position the Top Support onto the tubular stabilizers as 
    shown in 

Figure 3

. Slide the Top Support up the stabil- 

    izers until the Top Bracket contacts the underside of the 
    worksurface. 
  
    Fasten the 

Clamp

 to the Top Support using the four #10- 

    24 x 1.00” Socket head cap screws provided. This will lock   
    the Top Support in place.  
  
3. Fasten the Top Supports to the underside of the work- 
    surface using the #10AB x 3/4” Phillips head screws  

provided. Carefully drill a 1/2” deep pilot hole in the  
bottom of the worksurface for each screw. See 

Figure 3

.  

  
 

 

  

Aluminum Top Support 
         (R.H. shown) 

Top Bracket 

Top Bracket 

Left 

Center 

Right 

Figure 1 

#10-24 x .375  
Socket head cap 
screws 

Top bracket 

Plastic insert 

Top support 

Clamp 

Figure 3 

Top support 

Worksurface 

#10AB x 3/4” Phillips 
head screws 

Tubular stabilizer 

#10-24 x 1.00 Socket 
head cap screw 

Clamp 

Enhanced  
upright 

Figure 2 

82486/82354 

 
 

  

technical furniture 

D-12 

Содержание LMS











































































































































































































Отзывы:

Нет отзывов