manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 176 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 176

I n t e r a c t i v e   M o n i t o r  
A r m    

Tools Required 
     

-5mm Allen wrench 

     -Phillips screwdriver 
     -Plastic mallet 
 
There are two ways to attach a 

Monitor Arm

 to a Full 

Frame; with a 

Beam

, or with a 

Post Mount

. Both methods 

are incuded in these instructions.  
  

MONITOR ARM MOUNT-POST

 

  

NOTE

: The 

Post Mount

 can be placed on any side 

              by side rows of trapezoidal holes. Once in 
              place, it is ready for the monitor arm. 
  
1. Select the desired position for the Post Mount. 
    Next, insert the hooks located on the back of the 
    Post Mount into the slots in the post. To assure  
    that the hooks are firmly seated, tap the top of the 
    Post Mount with a Plastic mallet or equivalent. See 
    

Figure 1

. 

  

MONITOR ARM MOUNT-BEAM 
  
NOTE

: The Beam is attached to posts spaced to cor- 

              respond with the length of the beam ordered. 
              There are 24”, 30”, 36”, 42”, 48”, 60”, and 
              72” Beams. Beams require a separate Monitor 
              Arm Mount. 
  
1. Select the desired position for the Beam. Next , in- 
    sert the hooks located on the back of the Beam into the  
    slots in the posts. To assure that the hooks are firmly 
    seated, tap the top corners of the Beam with a plastic  
    mallet or equivelent. See 

Figure 2

. 

  
2. Hang the Monitor Arm Mount

 

on the Beam and lock  

    it in place by attaching the 

Retainer bar

 with two #10- 

    24 x 1.00 Socket head cap screws. See 

Figure 3a

 and 

   

 3b

. 

  
 
     

Monitor Arm Mount 

Post Mount 

Beam Mount 

Full frame 

Figure 1 

Trapezoid slots 

Figure 2 

Figure 3a 

Beam 

Trapezoid slots 

Hooks 

Full frame 

Beam 

Beam Mount 

#10-24 x 1.00 Socket 
head cap screws 

Figure 3b 

Beam 

Retainer bar 

Monitor arm mount 
(post) 

Monitor arm mount 
(beam) 

82454 

 
 

  

technical furniture 

P-1 

Содержание LMS











































































































































































































Отзывы:

Нет отзывов