manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 55 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 55

-1- 

H o o k - O n   P e n i n s u l a  
W o r k s u r f a c e  

Please read these instructions carefully and follow 
the installation steps in sequence.

 

 
 

Tools Required

 

     - 5/32 Hex Key 
     - Phillips Head Screwdriver  
     - 3/8” Socket with extention 
     - Ratchet 
 
 
 
 

NOTE

: The height adjustable 

Tubular Leg

 provides  

             approximately 1.00” height adjustability to 
the  
             Worksurface.   
 
Using the 5/32” Hex Key, remove from the Upright 
any  1/4-20 x 1/2” Button head cap screws that would 
interfere with the Support Brackets. 
 
1.  Remove the two 

Hook-on Top Supports 

from  

     the carton.  Hook them to the Full Frame at 28”  
     (top of the bracket) for a 29” finished height (or  
     39” for stand-up height).  To assure the hooks are  
     properly seated, tap the top rear corner with a  
     plastic or plastic mallet.  See 

Figure 1

.    

 
     Locate the small hole inside the back of the Top  
     Support and insert the 1/4”-20 x 1/2” Hex head     
     screw with the 3/8” socket. See 

Figure 1

. 

 
     The supports are left and right hand.  The smooth     

Hook-On Peninsula 

Hook-on surface 
support 

Hooks 

Full Frame 

Glide 

Figure 1. 

1” less than desired 
surface height 

1/4”-20 x 1/2” Hex 
head screw 

 

83523 

 
 

  

technical furniture 

D-8 

Tubular Leg 

Peninsula top 

Figure 2. 

Pre-drilled holes 

#10AB x 1.00” pan head 
self tapping screws 

 2. Remove the 

Peninsula Worksurface 

from the carton 

    and place it carefully , finish side down, on a smooth 
    clean surface. 
  
3. Attach the 

Tubular Leg 

to the worksurface.  Align the  

    holes in the mounting plate with the appropriate holes  
    in the worksurface and secure using the six #10AB x  
    1.00” Pan head self tapping screws provided.  See  
    

Figure 2

.  

  
 
     

Содержание LMS











































































































































































































Отзывы:

Нет отзывов