manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 190 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 190

2 

O v e r h e a d   L i g h t i n g  
( c o n t . )  

TOOL TRACK ATTACHMENT  

 

 
1. The 

Tool Track 

attaches to the under side of the   

    Light Support Brackets at the front.  Align the  
    hole in the Tool Track  with the hole in the    
    Support Bracket and drive one 1/4-20 x 1/2”  
    screw and lock washer into the end of  each  
    Bracket.  Screws at both ends should be started  
    before tightening either one. See 

Figure 4

. 

 
2. Insert one 

End Stop

, #83632, into the Tool Track  

    (see 

Figure 4

 for orientation).  The straight plate   

    is on the outside creating a sandwich or clamping  
    attachment.  

Do Not 

tighten yet! 

 
3. Insert the 

Tool Trolley 

(not shown) next and then   

    the second End Stop.  Assemble the 

End Caps

 to  

    each end. 

NOTE

: If an End Cap strikes a screw  

    head before seating fully into the tube, loosen the  
    screw so that the End Cap slides under the head,  
    then re-tighten. Or, trim the cap with scissors. 
 
4. Slide the End Stops to each end to a position just  
    short of the End Caps and tighten. 
 
 

 

 
 
2. Packaged with the Light Support Brackets are two  
    

Mounting Spacers

 for the light which are in a  

    separate carton.  Attach a Spacer  to each end using 
    three 10-24 x 3/8 screws for each. See 

Figure 2

. 

 
3. Position the light between the Support Brackets  
    with the Spacer flange above the Brackets.  Rest the  
    light on the Brackets.  There are three positions,  
    front to back, for the light. Select one by aligning the  
    Spacer holes with Bracket holes and attach with two  
    1/4-20 x 1/2” Button head screws at each end.  See  
    

Figure 3

. 

Figure 2 

#10-24 x 3/8” Pan head 
screw 

Mounting 
spacer 

Overhead light 

Figure 2 

Figure 

Support bracket 

Tool track 

End stops 

End cap 

Lock washer 

1/4”-20 x 1/2” Button head 
screw 

Support bracket 

Spacer flange 

1/4”-20 x 1/2” Button head 
screws 

Overhead light 

Figure 3 

83494 

 
 

  

technical furniture 

Q-4 

Содержание LMS











































































































































































































Отзывы:

Нет отзывов