manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 46 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 46

C a s t e r   B a s e  

SAFETY INSTRUCTIONS 

 
1. The Frame and Upright Assembly must be unloaded 
    prior to installation to the 

Caster Base

.

 

    

 

    If the Caster Base is being installed onto a Frame 
    configuration that is in use, the unit must be unloaded  
    and partially unassembled.  
  
2. A minimum of two people are required for the instal- 
    lation. 
  
3. The Frame and Upright Assembly must be bolted to  
    the Caster Base prior to use. 
 
4. Assemble components and load the Frame unit from  
    the bottom up. 
  
5. Do not exceed the maximum load rating for individual 
    components. 
  
6. Do not exceed a total unit loading of 1500 lbs.(682Kg). 
  
    

Tools Required 

         -1/2” wrench  
  
 1. Position the 

Caster Base

 adjacent to the empty Frame 

     unit and lock the four casters in place by rotating their  
     individual brakes clockwise. 
 
2. Remove the 

Levelers

 and 

Foot Caps

 from the Vertical  

    Upright feet. See 

Figure 1

. 

NOTE

: If it is a 

Full   

    Frame Basic

, remove the Levelers and Front Caps  

    only. Replace the removed caps with the 

Angled Caps  

    

packaged with the Caster Base. See 

Figure 2

. 

  
3. With a minimum of two people, lift the assembly and 
    position it on the Caster Base. Fasten it to the Caster 
    Base using the four 5/16”-18 x 2” Hex head machine 
    screws and washers provided. Tighten securely with a  
    1/2” wrench. See 

Figure 2

.  

  
 
  
  
 

Caster Base 

Figure 2 

Figure 1 

Foot cap 

Foot cap 

Leveler 

Frame and upright 
assembly 

5/16”-18 x 2” Hex 
head machine screw 

Plain washer 

Angled cap 

Angled cap 

Caster base 

Frame and upright 
assembly 

81729 

 
 

  

technical furniture 

C-4 

Содержание LMS











































































































































































































Отзывы:

Нет отзывов