manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 26 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 26

86270 

3. Turn the assembly upright and position it underneath  
    the viewport cutout in the Worksurface. Align the  
    holes in the Top Rails with the corresponding holes in  
    the Worksurface and attach with the #14AB x 3/4”  
    screws provided. See 

Figure 3

. 

  
4. Attach the 

Tracks

 to the to the underside of the 

    Worksurface by aligning the holes in the Tracks with 
    the corresponding holes in the Worksurface (or  
    stiffener on a 30” Linx Worksurface) and securing  
    with the #6AB x 5/8” screws provided. 

Note

: One end  

    of each Track is painted black; this end must be to the  
    front of the Worksurface. See 

Figure 4

.     

                                 
    Install a 

Rubber Stop

 in the center hole at the rear of  

    each Track with the #6AB x 5/8” screws provided. 
  
5. Install the 

Keyboard Drawer 

by sliding the two  

    brackets into the Tracks installed in step 5. Push the 
    Drawer all the way to the rear of the Tracks and in- 
    stall a Rubber Stop in the center hole at the front of 
    each Track with the #6AB x 5/8” screws provided.   
    See 

Figure 5

. 

  
       
 

R e t o f i t   K i t  
N o v a   ( c o n t . )  

 
 

  

technical furniture 

Figure 4 

A-23 

Rubber stop 

#6AB x 5/8” 
Screws 

Tracks 

Stiffener 

Worksurface 

#6AB x 5/8” 
Screws 

#14AB x 3/4” 
screw 

Viewport cutout 

Retrofit assembly 

Worksurface 

Figure 3 

Figure 5 

Rubber stop 

Keyboard drawer 

Tracks 

Brackets 

#6AB x 5/8” 
Screw 

Worksurface 

Содержание LMS











































































































































































































Отзывы:

Нет отзывов