manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 159 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 159

C a b l e   M a n a g e m e n t  
A r m  

       
  Horizontally Oriented 
Cable Management Arm 

    Vertically Oriented 
Cable Management Arm 

83109 

 CABLE MANAGEMENT ARMS: 
 

  

* 

Vertically oriented 

Cable Management Arms

 are available in two styles: 

  
1. LA35-MM may be attached to 12”, 24”, 30”, 48”, 60” and 72” Tower Roll-out shelves, all Rack Mount Roll-out shelves, 
    and all LAN Locker II Bottom Roll-out shelves. This Cable Management kit includes an adjustable bracket for attach- 
    ment to 24”/30” LMS Frame Modules and Rack Mount Rails. 
  
2. LA38-MM may be attached to 36” Tower Roll-out shelves when installing on LMS Frames with 36” Modules. 
  
*Note: 36” Tower Roll-outs manufactured before 10/97 may not have the appropriate cable mounting holes, in which 
             case drilling may be required.  

 

Tools Required 

     -Phillips head screwdriver 
     -Electric drill (optional) 
     -#19 Drill bit (optional)  

* 

Item LA36-MM may be attached to Rack Mount Roll-out shelves only in a horizontal orientation. LA36-MM Horizontal  

   Cable management Arm  kits can also be installed in a vertical orientation to existing horizontal cable arm brackets.     
   (Extra brackets included with the kit may be discarded.) 
  

 
 

  

technical furniture 

M-24 

Содержание LMS











































































































































































































Отзывы:

Нет отзывов