manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 43 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 43

O p e n   M o b i l e   B a s e  

Tools Required

 

     -5/32” Allen wrench (provided) 
     -1/4” Allen wrench (provided) 
  
  

UPRIGHT /MOBILE BASE ASSEMBLY 

 
   

Note

: Place the 

Mobile Base

 in an area with adequate   

              floor space for the base and the Full Frame. This  
              Base design requires two (2) Enhanced Uprights  
              and a corresponding Frame.  
  
    Enhanced Uprights are shipped fully assembled. It is  
    recommended to slide the Cover from the top of the 
    Vertical Cable Management duct prior to assembly of 
    the Upright to its frame. Remove the protective inner 
    packing located inside the Vertical duct. 
 
1. Remove the feet from 

Enhanced Uprights

. The screws  

    will be re-used. You may want to store the feet for  
    future re-assembly should mobility no longer be required.  
    See 

Figure 1

. 

  
2. Remove all of the plastic hole plugs from one side 
    of an Upright. Remove them from the opposite side of  
    the second Upright creating a left and right hand. See 

Fig-

 

    

ure 1

. The hole plugs will not be re-used. 

  
3. Re-assemble one Upright to the Mobile Base, keeping the 
    side with no plugs to the inside. See 

Figure 2

.

 Insert the

 

    

screws into the round tubes first

. Do not tighten the 

    screws at this time. Slight movement may be needed when 
    positioning the Full Frame.  
     
     
  
  
 
  
 
  

24”, 30”, 36” 
Mobile Base 

48” thru 72” 
Mobile Base 

Figure 1 

Plastic hole plugs 

Enhanced 
upright 

5/16”-18 x 1.00” Socket 
head screw 

Foot 

Lock washer 

.25”-20 x 1.00” Button 
head cap screw 

Top cap 

Cover 

83118 

 
 

  

technical furniture 

C-1 

Содержание LMS











































































































































































































Отзывы:

Нет отзывов