Eaton LMS Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 202

Eaton LMS Скачать руководство пользователя страница 16

87467

technical furniture

F r a m e L i n k i n g K i t
( c o n t . )

INSTALLING THE FRONT SUPPORT

If worksurfaces are being installed in the linked frame
configuration, they must be positioned at the same
height and

Front Supports

must be installed with the

Add-On Foot at each frame joint.

The Front Support can be installed with both 27” and
36” deep worksurfaces. See figure 1. The support can
be installed at heights of 27” to 40” for 27” deep work-
surfaces and 29” to 40” for 36” deep worksurfaces.

1. Remove the two 1/4”-20 x 1-3/4” button head cap
screws and hex nuts from the Front Support assem-
bly. See figure 2.

2. With the upper section loose inside the lower
section,
   insert the bottom tabs on the lower section thru the
slots in the

Bearing Plate

and into the appropriate

slots in the top of the foot.

  • Front slots for 27” deep worksurfaces
  • Rear slots for 36” deep worksurfaces.

3. Slide the upper section up to engage the hooks with
the appropriate access holes in the bottom of each
top support. See figures 1 and 3.

4. Align the holes in the upper and lower support sec-
tions and re-install two 1/4”-20 x 1-3/4” button head
  cap screws and hex nuts into the appropriate holes.

  • Use holes toward front for 27” deep worksurfaces.

  • Use holes toward rear for 36” deep worksurfaces.

Tighten securely using a 5/32” allen wrench and a
7/16” wrench.

Figure 1

27”

36”

27” Deep Worksurface

36” Deep Worksurface

Front
support

Front
support

Figure 2

Top supports

Bearing plate

Tab

Slots

1/4”-20 x 1-3/4” button
head cap screws

1/4”-20 hex nuts

Hooks

Figure 3

Hooks

Top support

Add-on foot

A-13

«
...
14
15
16
17
18
...
»

Содержание LMS











































































































































































































Отзывы:

Нет отзывов