manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 11 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 11

-6- 

A-8 

 
The 

Tech Corner Post

 enables two or more Full/Open Frames to 

be configured perpendicular to each other. It can also create “T” 
or “X” shaped configurations. See 
 

Figure 6

. Dissimilar height units may be used around the Tech 

Corner Post, provided it is equal to the tallest frame.   
 
1.  First, assemble an Upright to the end of the  
     Full/Open Frame opposite from the corner post.   
     This will provide some extra stability while  
     attaching the frame to the Tech Post. 
 
     The Tech Corner Post has two vertical rows of     
     holes on all four sides allowing attachment of the  
     Full Frame. The end of the frame should centered  
     on the post when correctly positioned. Attach with   
     1/4”-20 x 1-5/8” Button Head Cap Screws.  See   
     

Figure 7

. 

 
2.  Check for vertical alignment and horizontal level of   
     the entire assembly.  Adjust the 

levelers

 under the  

     post, upright feet, and beneath the interior verticle    
     post of the 48” and larger Full Frames as needed. 
 
 
 
 

Figure 6 

Tech corner post 

Tube cap 

Full /open 

1/4”-20 x 1/5/8” 
Button head cap screws 

Upright 

T e c h   C o r n e r   P o s t  

Frame 

Frame 

Post 

Frame 

Frame 

Post 

Post 

Frame 

Frame 

Frame 

Frame 

“L” 

“T” 

“X” 

Figure 7 

82354 

 
 

  

technical furniture 

Содержание LMS











































































































































































































Отзывы:

Нет отзывов