manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 28 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 28

R e t o f i t   K i t  
N o v a   ( c o n t . )  

86270 

 

MONITOR SUPPORT INSTALLATION

 

  

NOTE

: The 

Monitor Support

 adjusts three ways - for 

              height, angle and forward/backward. Adjust it  
              so that you have a comfortable viewing angle 
              of the monitor when you’re in a normal work- 
              ing position. 
  
1. The Monitor Support is installed using the plastic 
    

Tracking Blocks

.

 

See 

Figure 8

,

 

detail a. For stan-  

    dard size monitors, a good starting point is nine bars  
    down (rest the bottom of a Tracking Block on the  
    ninth bar down from the top) and seven bars up (rest 
    the bottom of a Tracking Block on the seventh bar 
    from the bottom). 

NOTE

: Do not install the  

    security screws at this time. 
  
2. With the assistance of another person, lower the  
    monitor through the viewport opening while allowing  
    wires to feed through the back of the Monitor Sup- 
    port.  

   
3. To make angle adjustments, move either the top 
    or bottom Tracking Blocks independently of each  
    other. For height adjustments, move both bottom and 
    top Tracking Blocks. To adjust the viewing distance, 
    simply slide the Monitor Support forward or back- 
    ward. When the adjustments are completed, install 
    the #6AB x 5/8” Security screws. See 

Figure 8

. 

  
4. Carefully install the 

Viewport Glass

 into the view- 

    port opening. 
 

 
 

  

technical furniture 

Figure 8 

A-25 

Retrofit assembly 

#6AB x 5/8” 
security screw 

Tracking block 

Monitor support 

Upper tracking 
block 

Lower tracking 
block 

Содержание LMS











































































































































































































Отзывы:

Нет отзывов