manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 141 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 141

H o r i z o n t a l   C a b l e  
M a n a g e m e n t    
C o n n e c t o r  

 
 

Tools Required

 

      -Phillips head screwdriver 
      -5/32" Allen wrench (provided) 
      -36" Carpenters level 
 

Tech Corner Post

 

 
1. The 

Tech Corner Post

 enables LMS units and  

    MediaLinx to turn 90 degrees.  Dissimilar height     
    units may be used around the Tech Corner Post,  
    provided it is equal to the tallest frame.   
 
 
    First, using instructions supplied with the Full         
    Frame and Upright, assemble an Upright to the  
    end of the Full Frame opposite from the Corner   
    Post. This will provide some extra stability while  
    attaching the frame to the Post. 
 
 
    Posts have two rows of holes on each of four sides  
    allowing right or left end attachment of the Full 
    Frame.  The end of the frame should be centered  
    on the Post when correctly positioned.  Attach  
    with 1/4-20 x 1- 5/8" Button head cap screws.  See  
    

Figure 1

. 

 
2. Check for vertical straightness and horizontal  
    level of the entire assembly.Adjust, using the  
    levelers under the Post, Upright feet, and beneath  
    the interior vertical posts of the 48" and larger  
    Full Frames. 
 
 

Figure 1. 

Upright 

1/4”-20 x 1-5/8” Button 
head cap screws 

Full Frame 

Tech corner post 

Tech Corner Post/Corner Cable       

82302 

 
 

  

technical furniture 

M-6 

Содержание LMS











































































































































































































Отзывы:

Нет отзывов