manualshive.com logo in svg

Eaton LMS, Руководство по установке, Страница: 167 / 202

Поделиться
Скачать
Eaton LMS Скачать руководство пользователя страница 167

4 

 
 

INSTALLATION ON OTHER SURFACES

 

 
 

One or more 1” x 18” strips of 

3M Double Faced

 

Adhesive 

Tape

 has been provided for installation of the Power Strip 

to any flat surface.  
 
1. Clean the back side of the 

Power Strip 

and the  

    mounting surface with Isopropyl alcohol or equivalent  
    surface cleaner. 

 
Note

: It  is  recommended  that the position of the  

           Power Strip be determined 

before

 attaching the  

           Power Strip to a surface to avoid misaligning the  
           strip and ruining the tape.   
 
2. Remove the green and white backer from one side of  
    the tape strip.  Center or equally space the tape on the   
    back of the Power Strip. Press firmly into place.See  
    

Figure 7

. 

 
3. Remove the remaining white backer from the tape strips. 
 
4. Position the Power Strip on the surface. 

 

5. The Horizontal Cable Management provides approxi-  
    mately three inches of space for cables or electrical plugs. 
  
6.  To ensure proper adhesion, do not apply a load to the  
     Power Strip for 24 hours. 

 

 

Figure 7 

Double faced tape 
#81120 

Power strip 

   
3. Next, install the Power Strip into the Clips by engaging 
    one side of the Strip with the Clips and the pushing  
    down to engage the other side. See 

Figure 5

. Be sure 

    that the Power Strip is firmly seated in each Clip. 
 
  
4. The Mounting Clips attach to the 

Single Standard 

in 

    same manner as as the Double Standard. But since there 
    is no feature on the Single Standard that denotes its cen- 
    ter, care must be taken to ensure that the Mounting Clips 
    are centered on the Single Standard and that they do not 
    interfere with the Upright or Side Frame screws. See 
    

Figure 6

.

 

  
 

Figure 6 

Figure 5 

Power strip 

Mounting clip 

Power strip 

Mounting clip 

#8-32 Screw 

Single standard 

Screws 

81559 

L o w   P r o f i l e  
( 1 5 a m p )  

 
 

  

technical furniture 

N-3 

Содержание LMS











































































































































































































Отзывы:

Нет отзывов