Canon Vizcam 1000, Руководство по обслуживанию

Страница: 671 / 840

COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
7-235
7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
Item
ADJ-Y/M/C/K
(Note 1)
OFST-Y/M/C/K
(Note 1)
P-TBL- M
C
Y
K
MASK-M
Description
Corrects user color balance adjustment.
• Be sure to set the setting for user color balance
adjustment to 0 before using this mode.
• Follow the image adjustment basic procedure.
Adjusts light area density and color balance.
• Follow the image adjustment basic procedure.
• If fogging is noted, increase the value.
• To increase reproducibility of images with extremely
low density, decrease the setting.
Use it to make fine adjustments so that the hues will be
closer to the hues of offset printing.
After comparing M/C/Y/K outputs against professionally
(offset) printed material,
if the print-out is lighter, increase the setting of ‘P-TBL-
M/C/Y/K’.
if the print-out is darker, decrease the setting of ‘P-TBL-
M/C/Y/K’.
Gray Hue Correction Mode
If greenish or bluish, increase the setting.
If magenta is too strong, decrease the setting.
Remarks
Settings: –8~+8
Standard: 0
+: Darker.
–: Lighter
Settings: –16~+16
Standard: Y=0
M=0
C=0
K=0
Settings: –3 to + 3
Standard: 0
See the descriptions
under ‘OPTION>
R-OPT>MANAGE’.
Standard:0
Settings:–6 to +6
REF.
Effective only if
the CCD sensor
of the new type
is used.
6. COL-ADJ (user color balance adjustment correction)
<M> <S> <R> <P> <F>
DISP
FUNC
COUNTER
OPTION
TEST
x
ADJUST
ADJ-Y
x
ADJ-M ADJ-C
x
ADJ-K
x
x
OFST-Y
x
OFST-M OFST-C
x
OFST-K
x
x
P-TBL-Y
x
P-TBL-M
P-TBL-C
x
P-TBL-K
x
COL-ADJ READY READY
Note 1:
You must enter the appropriate value whenever you have replaced a PCB or initialized a RAM; record
any new values on the service label for this purpose.