Canon Vizcam 1000, Руководство по обслуживанию

Страница: 375 / 840

COPYRIGHT © 2001 CANON INC. CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-1
5. INSTALLATION
I. SELECTING THE SITE
Select the site of installation with the following
considerations in mind; if possible, pay a visit to the
user's before delivering the machine.
1.
Make sure that the power supply enables
exclusive connection to a receptacle rated as
follows, and the appropriate terminal of the
receptacle is properly grounded for safety:
2. The temperature and humidity requirements
must be as shown in Figure 5-1. Avoid areas
near water faucets, water boilers, humidifiers,
or refrigerators.
*Set to 208V at time of shipment from the
factory; to change to 240V, be sure to use the
following voltage modification kit and replace
the heater and the wiring.
240V Voltage Modification Kit
Contents:
[1] 230V 650W upper heater .................. 1pcs
[2] 230V 550W lower heater .................. 1pcs
[3] 230V deck heater harness ................ 1pcs
[4] Label ................................................. 1pcs
Mode Voltage Amperage Receptacle
1 North American 208/240 V* 15 A NEMA 6-20R
2 European 230 V 16A DIN49440/49441
3 UK 230 V 13 A BS1363
4 Australian 230 V 15 A AS
Figure 5-1
5. The floor must be level so that all feet of the
machine are in contact with the floor and the
machine remains level.
Figure 5-2
3. Avoid areas near sources of fire and areas
subject to dust or ammonium gas. Avoid direct
rays of the sun; as necessary, provide
curtains.
4. The room must be well ventilated.
The level of ozone emitted by the
machine should not harm the health
of those around the machine. How-
ever, some may find the level un-
pleasant if the machine is used for a
long time in a poorly ventilated
room. Make sure the room is venti-
lated often.
230V650W
650W
230V550W
550W
240V
FS6-8393
This machine has been modified to 240V
for North America.
[1]
[2]
[3]
[4]
0
5 10 15 20 25 30
C
10
20
30
40
50
60
70
80
90
Humidity (%)