Canon Vizcam 1000, Руководство по обслуживанию

Страница: 667 / 840

COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
7-231
7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
Item
ED-MODE
(Note 1)
EDADJ-X
<TEMP-X>
<ED-X>
EDADJ-Y
<TEMP-Y>
<ED-Y>
(Note 1)
LOOP-MB
(Note 1)
LOOP-TH
(Note 1)
Description
Switches editor operation mode.
0: Normal operation
1: 1-point input check
2: Continuous input check
xxx xxx
xxx mm
<TEMP-X>
xxx
xxx mm
<ED-X>
EDADJ-X
Input coordinate adjustment value for sub scanning direction
(X direction) from the Editor
Input coordinate present values,
mm converted values
Post-correction computed values,
mm converted values
+ -
+
-
EDADJ-Y
EDADJ-X
Changes the processing method used to read images
into memory for coloring in area specification/color
creation.
If the value is increased, filling gaps will be easier; too
high a value, however, will result in bleeding.
If the slice level adjustment value is increased for
binarization used for reading images into memory for
area specification/color creation, finer lines may be
read.
Remarks
Standard: 0
Settings: –99~+99
(–12.6~+12.6mm)
Unit= 0.13mm (approx.)
Reference: 0
Settings: 0~3
Standard: 0
Settings: 0~255
Standard: 192
4. ED/RDF (editor/RDF adjustment)
<M> <S> <R> <P> <F>
DISP
FUNC
COUNTER
OPTION
TEST
xxx xxx
xxx mm
ADJUST <TEMP-X>
xxx
xxx mm
<TEMP-Y>
xxx
xxx mm
<ED-X>
xxx
xxx mm
<ED-Y>
ED-MODE
x
EDADJ-X
xxx
LOOP-MB
xxx
LOOP-TH
xxx
MRK-MB
xxx
MRK-TH
xxx
EDADJ-Y
ED/RF 1/2 READY READY