Avaya J100 Series Скачать руководство пользователя страница 249

Страница: 249 / 528

Parameter

Default
value

Description

PROVIDE_SHARED_
LINE_CONFIG

Specifies if the user has the ability to change Shared Line
configuration using the Settings menu on the phone.

Value operation:

• 0: Shared lines are not displayed in settings menu.

• 1: Shared lines are displayed in settings menu but all

information is read-only.

• 2: Shared lines are displayed in settings menu and is fully

configurable.

This parameter value is ignored in BLA mode.

PRIMARY_LINE_EXT
ENSION

Null

Specifies the default label for primary shared and private lines.
This value is used if the label for a primary call appearance is not
customized.

Note:

This value is optional. If not provided
FORCE_SIP_USERNAME value is used.

ANSWERED_ELSEW
HERE_POLICY

Specifies if phones present missed call indication for calls,
answered on other phones in the group.

Value operation:

• 0: The phone indicates calls answered on other phones of the

shared line as missed.

• 1: The phone logs calls answered on other phones of the

shared line to answered calls.

SHOW_CALLFOR_O
N_PRIMARY

Specifies whether incoming call pop-up messages are displayed
with ‘Call for’ when a call is addressed to a primary private or
shared line only.

Value operation:

• 0: The ‘Call for’ is not displayed.

• 1: The ‘Call for’ is displayed.

Related links

SCA configuration

on page 244

Broadsoft Device Management

on page 43

Shared Lines limitations

The following limitations apply to the Shared Lines feature:

• The features that are assigned to a phone are associated with the primary phone extension

and will only function on calls for the primary extension. For example, if a user enabled call

Feature configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

249

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 249 / 528

Результаты поиска

Содержание J100 Series

Отзывы: