Avaya J100 Series Скачать руководство пользователя страница 147

Страница: 147 / 528

Name

Description

Admin Access allowed from Phone

Specifies whether the craft procedures are used for the phone
configuration.

The options are:

•

Yes (default)

•

Admin Login fail attempt allowed

Specifies the number of failed attempts to enter the
Administration access code before the login is locked.

The options are from 1 to 20. The default value is 10.

Admin Login Locked Time after fail
attempt

Specifies the time interval in minutes to re-enter the
Administration access code after the login is locked.

The valid value is an integer from 5 to 1440. The default value
is 10 minutes.

Privacy

GDPR Mode

Specifies whether the Global Data Protection Regulations
(GDPR) are applied on the phone.

The options are:

•

Enable (default)

•

Disable

MLPP

Enable MLPP

Specifies whether the MLPP feature is enabled.

The options are:

•

Disable (default)

•

Enable

Maximum Precedence Level

Specifies the maximal allowed precedence level for the user.

The options are from 1 to 5. The default value is 1.

MLPP Network Domain

Specifies the MLPP Network Domain.

The valid values are: empty, “uc” and “dsn”. The default value is
empty.

MLPP Precedence Domain

Specifies the MLPP Precedence Domain.

The valid value is a sting of alphanumeric characters. The
default value is “000000”.

Enable Precedence Softkey

Controls whether the

Precedence

soft key should be displayed

on idle line appearances on the phone screen.

The options are:

•

Disable

•

Enable (default)

Table continues…

Configuring the phone using the web interface

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

147

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 147 / 528

Результаты поиска

Содержание J100 Series

Отзывы: