Avaya J100 Series Скачать руководство пользователя страница 149

Страница: 149 / 528

Name

Description

Preserved Call Duration

Specifies the time interval in minutes during which the call is
preserved. To apply this setting,

Enable IP Office

should be set

CCMS

and

Media Preservation

should be enabled.

This setting is applied only in the Avaya Aura

environment.

The valid value is an integer from 10 to 120. The default value
is 120 minutes.

Brightness

Display Brightness

Adjusts the brightness of the phone display.

The options are from 1 to 5. The default value is 4.

Button Module #1 Display Brightness

Adjusts the display brightness of the first attached button
module.

If no button modules are attached to the phone, this field is
disabled.

The options are from 1 to 5. The default value is 4.

Button Module #2 Display Brightness

Adjusts the display brightness of the second attached button
module.

If no button modules are attached to the phone, this field is
disabled.

The options are from 1 to 5. The default value is 4.

Button Module #3 Display Brightness

Adjusts the display brightness of the third attached button
module.

If no button modules are attached to the phone, this field is
disabled.

The options are from 1 to 5. The default value is 4.

Downloadable Directory

Downloadable Directory File Name

Enter the directory file name.

The .xml file is the file which has the global directory contacts
details and is stored in the file server.

Configuring date and time

About this task

When you click on any configuration field, the screen displays the details of that field in the

Parameter Help section.

Procedure

1. Log in to the web interface as an administrator.

2. In the navigation pane, click

Date & Time

Configuring the phone using the web interface

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

149

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 149 / 528

Результаты поиска

Содержание J100 Series

Отзывы: