manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 139 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 139

Name

Description

Emergency Softkey

Specifies whether the 

Emergency

 soft key is displayed after

the phone is registered.

The options are:

•

Do Not Display

•

Display without Confirmation

•

Display with Confirmation (default)

Softkey Emergency Number

Specifies the number(s) which is dialed when the 

Emergency

soft key is pressed.

The valid value is up to 30 dialable characters. The default
value is empty.

Value format: digits from 0 to 9, *, #.

Emergency Softkey on
Unregistration

Specifies whether the 

Emergency

 soft key is displayed when

the phone is not registered.

The options are:

•

Do Not Display

•

Display without Confirmation

•

Display with Confirmation (default)

Phone Lock

Enable Phone Lock

Specifies whether the Lock feature is enabled on the phone.

The options are:

•

Do Not Allow (default)

•

Allow

Phone Lock Idle Time

Specifies the idle time in minutes after which the phone is
locked.

The valid value is an integer from 0 to 10080. The default value
is 0 minutes.

Count of PIN/password attempts

Specifies the number of failed attempts that you can permit to
unlock the phone. After the user exceeds the permitted limit, the
user is blocked from attempting again for a specified time.

The numeric value ranges between 0–20.

If you set the value to 0, the user will not be blocked for the
failed attempts to unlock the phone.

Phone PIN/password lock time

Specifies the time period when the user will be blocked from
attempting to unlock the phone.

The numeric value ranges between 5–1440 minutes.

The default value is 5 minutes.

Table continues…

Configuring the phone using the web interface

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

139

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов