manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 163 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 163

Name

Description

OCSP Hash Algorithm

Specifies the hashing algorithm for an OCSP request. value
operation. discuss

The options are:

•

SHA-1 (default)

•

SHA-256

Use OCSP Caching

Specifies whether OCSP caching is in use.

The options are:

•

Yes (default)

•

No

OCSP Cache Expiry

Specifies the time interval in minutes for the OCSP cache expiry.

The valid value is an integer from 60 to 10080. The default value is
2880 minutes.

SCEP

SCEP Server

Specifies the URL address of the SCEP server.

The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is empty.

Common Name

Specifies the common name for the subject in an SCEP certificate
request.

The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is “$SERIALNO”.

Subject

Specifies the part of SUBJECT in an SCEP certificate request that
is common for requests from different device. For example,
Organizational Unit, Organization, Location, State, and Country.

The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is empty.

CA Identifier

Specifies the Certificate Authority Identifier.

Certificate Authority servers may require a specific CA Identifier
string to accept GetCA requests. If the device works with such a
Certificate Authority, the CA identifier string can be set through this
parameter.

The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is “CAIdentifier”.

Initiate renewal on % of Validity
Interval

Specifies the percentage of the identity certificate’s Validity interval
after which renewal procedures will be initiated.

If the renewal time interval has elapsed, the phone starts to contact
the SCEP server periodically to renew the certificate.

The valid value is an integer from 1 to 90. The default value is 90
percent.

Table continues…

Configuring the phone using the web interface

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

163

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов