Avaya J100 Series Скачать руководство пользователя страница 112

Страница: 112 / 528

2. In the navigation pane, click

Wi-Fi

3. Configure the following areas:

• WiFi Control

• WiFi Setting

• IP Configuration

• WEP

• WPA2 Enterprise (802.1x)

• QoS

4. Click one of the following:

•

Save

: To save the configuration changes.

•

Reset to Default

: To revert to the default values.

Wi-Fi settings field descriptions

Name

Description

WiFi Control

WLAN Network Configuration Mode

Specifies the Wi-Fi network configuration mode.

The options are:

•

Automatic (default)

•

Manual

WiFi Setting

Country

Specifies the country code to define the Wi-Fi radio parameters
permitted by the local regulatory domain.

Value format: two-character country code. The default value is

Use of 802.11d

Configures the 802.11d specifications automatically to the local
regulatory domain for the WLAN network.

The options are:

•

Disable (default)

•

Enable

WLAN Active SSID

Displays active SSID when Wi-Fi is active. This is an internal
parameter.

Value format: a sting from 0 to 32 characters. The default value
is empty.

Table continues…

Phone configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

112

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 112 / 528

Результаты поиска

Содержание J100 Series

Отзывы: