Avaya J100 Series Скачать руководство пользователя страница 172

Страница: 172 / 528

Configuring Softkey

About this task

You can configure the softkey to be displayed on the phone during an active call. The softkeys that

you configure are an addition to the existing softkeys in the phone. You can configure maximum

10 softkeys using the web interface.

You can use non-Latin symbols in softkey configuration in

Label

field.

Procedure

1. Log in to the web interface.

2. In the navigation pane, click

Softkey Configuration

3. Click on the required tab.

4. Enter the required value in the following fields:

•

Type

•

Action

•

Label

The

Label

field is optional.

5. Do one of the following:

• Click

Save

to save the changes.

• Click

Reset to default

to clear all the softkey values and revert to the default values.

The softkeys configured using the

46xxsettings.txt

file are ignored, if you configure

the sofkeys using the web interface.

Deleting Softkey

About this task

You can remove or delete the softkey.

Before you begin

Ensure that there is at least one softkey configured on the phone to delete it.

Procedure

1. Log in to the web interface.

2. In the navigation pane, click

Softkey Configuration

3. To clear the Softkey configuration, click the Delete icon on the right.

If your browser displays the

Confirm Delete Key?

notification, do not select the

Don’t let

this page create more messages

check box. Selecting it disables deleting the key

configuration.

Phone configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

172

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 172 / 528

Результаты поиска

Содержание J100 Series

Отзывы: