manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 236 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 236

Parameter name

Default value

Description

MP_GROUPS_TO_SEND

Null

Defines the list of Multicast
Paging groups which the phone
can send pages to. Priority is not
set for these groups. A maximum
of 10 paging groups can be listed.

The paging groups should be
separated with a comma (“,”), and
should be listed in the following
format:

IP:port:label

IP

, 

Port

, and 

Label

 denote the

same as the corresponding
MP_GROUPS_TO_LISTEN
values. All these settings are
required.

For example,

SET MP_GROUPS_TO_SEND 

“239.0.0.0:1208:Sales,

239.1.2.3:1210:Team”

MP_CODEC

1

Specifies a codec which will be
used to code and decode
Multicast Paging transmissions.

Valid values:

• 1: G.729 codec is used.

• 2: G.711u codec is used.

• 3: G.711a codec is used.

MP_PACKET_SIZE

20

Specifies the size of an RTP
packet in milliseconds. The valid
values are 10 through 80.

The value must be valid for the
selected codec and therefore
must not be changed unless
necessary.

Prioritization of codecs

This feature allows the administrator to set priority of use for all codecs, supported by the phone.

You can configure this feature through the web user interface in 

SIP settings

 > 

Codec Priority

and in the 

46xxsettings.txt

 file.

If you do not set a codec priority, the phone uses the default priority.

Feature and application configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

236

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов