manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 405 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 405

Parameter name

Default value

Description

PHONE_SCREEN_MODE

1

Specifies the screen mode
used on the phone by
default and whether the
user can change this
setting in the Settings
menu.

Valid values:

• 0: Non-forced Half

Screen mode is used by
default, and the Display
menu is available on the
phone. The user can
change the screen width
setting manually to
override the
PHONE_SCREEN_MO
DE parameter value.

• 1: Non-forced Full

Screen mode is set. This
is a default value which
is used at the first boot-
up of the phone. The
Display menu is
available under the
Settings menu, and the
user can change the
screen width setting
manually to override the
PHONE_SCREEN_MO
DE parameter value.

If
PHONE_SCREEN_MO
DE is set to 1 after the
phone screen mode is
set to Half, this setting
will have no effect.

• 2: Forced Half Screen

mode is used on the
phone, and this setting
cannot be changed by
the user.

• 3: Forced Full Screen

mode is used on the
phone, and this setting

Table continues…

List of configuration parameters

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

405

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов