Avaya J100 Series Скачать руководство пользователя страница 143

Страница: 143 / 528

Name

Description

Handset Profiles

Specifies an ordered list of names to be displayed for handset
audio profile selection.

The list contains audio profiles set in the web interface, the

46xxsettings.txt

file and internally, for example:

Default,Normal,Amplified,Hearing Aid

The default value is empty.

Handset Profile Default

Specifies the number of the default handset audio profile.

The options are from 1 to 20. The default value is 1.

Default Acoustic Exposure
Protection Mode

Specifies the acoustic exposure protection mode.

The options are:

•

Off (Default)

•

Dynamic

•

4 hours

•

8 hours

Dialing

Dial Plan

Specifies the dial plan used in the phone.

Value format: a sting of 0 to 1023 characters without any
intervening spaces.

The default value is empty.

No Digit Dial Timer

Specifies the time in seconds during which the phone waits for
a digit to be dialed after going off-hook and before generating a
warning tone.

The valid value is an integer from 0 to 60. The default value is
20 seconds.

Inter-digit Wait Timer

Specifies the time in seconds during which phone waits after a
digit is dialed before sending a

SIP INVITE

The valid value is an integer from 0 to 10. The default value is 5
seconds.

Dial Local Area Code

Specifies whether the user must dial the area code of calls
within the same area code regions.

The options are:

•

No (default)

•

Yes

Local Area Code

Indicates the phone local area code which allows the user to
dial local numbers with more flexibility.

The valid value is a sting of 5 digits ranged from 0 to 9. The
default value is empty.

Table continues…

Configuring the phone using the web interface

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

143

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 143 / 528

Результаты поиска

Содержание J100 Series

Отзывы: