manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 122 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 122

Name

Description

G.729

Specifies whether the G.729A codec is enabled.

The options are:

•

Disable

•

Enable without Annex B support (default)

•

Enable with Annex B support

G.711u law

Specifies whether the G.711u law codec is enabled.

The options are:

•

Disable

•

Enable (default)

G.711a law

Specifies whether the G.711a law codec is enabled.

The options are:

•

Disable

•

Enable (default)

Send DTMF

Specifies whether the phone sends DTMF tones in-band as regular audio,
or out-of-band using RFC 2833 procedures.

The options are:

•

In-band

•

Out-of-band (default)

OPUS Payload

Dynamically specifies the RTP payload type to be used for OPUS codec.
The parameter is used when the media request is sent to the far-end in an
INVITE or 200 OK when INVITE with no Session Description Protocol
(SDP) is received.

The valid value is an integer from 96 to 127. The default value is 116.

G.726 Payload

Specifies the RTP payload type to be used for the G.726 codec.

The valid value is an integer from 96 to 127. The default value is 110.

DTMF Payload

Specifies the RTP payload type to be used for RFC 2833 signaling.

The valid value is an integer from 96 to 127. The default value is 120.

Codec Preference

Specifies the preferred priority of codecs.

The valid value is a text string with codec names, separated by commas.

RTP

Table continues…

Phone configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

122

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов