Avaya J100 Series Скачать руководство пользователя страница 167 | Manualshive

Страница: 167 / 528

Avaya J100 Series Скачать руководство пользователя страница 167

Configuring Calendar of the phone

About this task

When you click on any configuration field, the screen displays the details of that field in the

Parameter Help section.

Procedure

1. Log in to the web interface as an administrator.

2. In the navigation pane, click

Calendar

.

3. Configure Exchange Calendar.

4. Click one of the following:

•

Save

: To save the configuration changes.

•

Reset to Default

: To revert to the default values.

Exchange Calendar field description

Name

Description

Exchange Calendar

Provide Exchange Calendar

Specifies whether the Exchange Calendar menu is
available on the phone.

The options are:

•

Enable

•

Disable (default)

Exchange User Domain

Specifies the user domain for the Microsoft
Exchange Server.

The valid value is a string of up to 255 characters.
The default value is empty.

Exchange Email Domain

Specifies the email domain for the Microsoft
Exchange Server.

The valid value is a string of up to 255 characters.
The default value is empty.

Exchange Server List

Specifies the list of Microsoft Exchange Server IP or
DNS addresses.

The valid value must be in the dotted decimal name
format or DNS name format without any intervening
spaces. The maximal value length is 255
characters.

The default value is empty.

Table continues…

Configuring the phone using the web interface

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

167

Comments on this document? [email protected]

«
...
165
166
167
168
169
...
»

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов