Avaya J100 Series Скачать руководство пользователя страница 110

Страница: 110 / 528

Name

Description

VLAN ID

Specifies the VLAN ID. To assign a VLAN ID, type the VLAN ID.
Configure this parameter if the phone uses a different VLAN than the
default data VLAN.

The valid value is an integer from 0 to 4094. The default value is 0.

VLAN Separation Mode

Specifies the VLAN separation mode.

The options are:

•

Enabled (default)

•

Disabled

VLAN Test - Wait Time for
DHCP Offer

Specifies the wait time interval in seconds to receive a DHCPOFFER
on a non-zero VLAN.

The valid value is an integer from 0 to 999. The default value is 60
seconds.

PC Port VLAN ID

Specifies the VLAN ID of the computer port.

The valid value is an integer from 0 to 4094. The default value is 0.

Tags to PC Ethernet Interface

Specifies whether the VLAN tags are stripped from Ethernet frames
that leave the computer port.

The options are:

•

Do not remove

•

Remove (default)

QoS

Audio Priority (Layer 2)

Specifies the Layer 2 priority value for audio (RTP and RTCP) streams.

The valid value is an integer from 0 to 7. The default value is 6.

Signaling Priority (Layer 2)

Specifies the Layer 2 priority value for signaling protocol messages.

The valid value is an integer from 0 to 7. The default value is 6.

Audio DiffServ (Layer 3)

Specifies the layer 3 Differentiated Services (DiffServ) code point for
audio frames generated by the phone.

The valid value is an integer from 0 to 63. The default value is 46.

Signaling DiffServ (Layer 3)

Specifies the layer 3 Differentiated Services (DiffServ) code point for
signaling frames generated by the phone.

The valid value is an integer from 0 to 63. The default value is 34.

LLDP

Table continues…

Phone configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

110

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 110 / 528

Результаты поиска

Содержание J100 Series

Отзывы: