manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 130 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 130

Name

Description

Shortcut action Autodial

Specifies the shortcut action performed by activating the
Autodial line during an active call or, in case of Call Park, during
an active or a held call.

Using Autodial line keys as shortcuts is available only in the
Broadworks environment.

The options are:

•

Call to Autodial destination (default)

•

Transfer to Autodial destination

•

Blind transfer to Autodial destination

•

Conference to Autodial destination

•

Park to Autodial destination

Call park shortcut action is available only in the Broadworks
environment.

Call Decline policy

Specifies whether the user can decline the incoming call. You
can enable and disable the feature using the following options:

The options are:

•

Disabled (Default)

•

486 method

: By selecting this value you enable the Call

decline policy for the user. 486 method indicates that the call
ringing location is not available to take the call.

However, the ringing continues in other locations.

•

603 method

: By selecting this value you enable the Call

decline policy for the user. 603 method indicates that no
location is available to take the call.

Shortcut action BLF Park

Specifies the way parking a call is performed when the Shared
Parking line is activated during an ongoing call.

The options are:

•

Blind transfer to BLF Park destination (default)

•

Dial Park FAC + BLF Park destination

: this option might not

be available in all the environments.

Table continues…

Phone configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

130

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов