manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 128 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 128

Name

Description

DND Priority over Call Forward
(Unconditional, Busy)

Specifies the priority between the Do Not Disturb and Call
Forward (Unconditional/Busy) features when both are activated
by the user.

The options are:

•

Yes

•

No (default)

Auto Answer

Specifies the status of the Auto Answer feature.

The options are:

•

Do Not Allow (default)

•

Allow

Mute on Auto Answer

Specifies muting when the Auto Answer feature is enabled.

The options are:

•

Yes (default)

•

No

Hold Reminder Timer

Specifies the time in seconds after which the phone plays the
hold reminder tone.

The valid value is an integer from 0 to 999. The default value is
0 seconds.

Conference continues on host
hangup

Specifies whether a conference call continues after the host
hangs up.

The options are:

•

Yes

•

No (default)

Presence

Specifies the status of the Presence feature.

The options are:

•

Do Not Allow

•

Allow (default)

Prioritize own incoming call

Specifies whether user’s own incoming calls have priority over
BLF calls.

The options are:

•

Disable (default)

•

Enable

Table continues…

Phone configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

128

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов