Avaya J100 Series Скачать руководство пользователя страница 31

Страница: 31 / 528

Automatic phone provisioning using Device Enrollment Services

During initial boot-up, the phone prompts users to select if they want to contact the Device

Enrollment Services server. The phone displays the

Do you want to activate Auto

Provisioning now

prompt.

The user has 60 seconds to select

Yes

options or the timeout will be activated.

The following options are available:

•

Yes

: This option indicates that the phone should use only Device Enrollment Services for

server discovery instead of a local network.

If the phone can contact Device Enrollment Services and is able to obtain the configuration

server URL, it will contact the configuration server to get the settings. If the phone fails to

contact the configuration server, it will prompt the user to enter the configuration server

information manually.

If the phone can contact Device Enrollment Services, but there is no configuration server

assigned to the phone on Device Enrollment Services, it will prompt the user to enter the

enrollment code.

When the user enters the enrollment code, the phone will contact Device Enrollment Services

again to obtain data on its configuration server and will contact the configuration server for

downloading the settings.

The user can cancel the operation of entering the enrollment code. In this case, he will be

prompted to enter the configuration server manually.

•

: This option indicates that the phone should not use Device Enrollment Services and

should discover the configuration server using the existing mechanism based on DHCP

SSON, LLDP, PnP or Administration menu. If the phone fails to discover the configuration

server using DHCP SSON, it will prompt the user to enter a configuration server manually.

•

Timeout

: After the interval of 60 seconds, if no option is selected, the phone will use the

existing mechanism based on DHCP SSON. If the phone fails to discover the configuration

server in this case, it will contact Device Enrollment Services to get the configuration server

URL.

The following diagram shows the flow of Device Enrollment Services discovery procedure:

Provisioning Server configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 31 / 528

Результаты поиска

Содержание J100 Series

Отзывы: