manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 55 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 55

Code

Parameter

11

PHY1STAT

12

PHY2STAT

14

SIG

15

SIP_CONTROLLER_LIST

Extending use of DHCP lease

Avaya J100 Series IP Phones support configuration of network parameters using DHCP as per
RFC 2131. However, when a DHCP server becomes unreachable and the DHCP lease currently
held by the phone expires, the phone continues to use the same lease until the DHCP server
becomes reachable. This functionality is controlled by setting the following parameter:

Parameter name

Default value

Description

DHCPSTD

0

Specifies if the expired DHCP lease is used.

Value operation:

• 0: Continue use of the expired DHCP lease if

the lease could not be renewed.

• 1: Stop using the DHCP lease immediately

when it expires, as per the standard.

The parameter is configured through the

46xxsettings.txt

 file.

When this feature is enabled (DHCPSTD=1), the phone continues to use the lease data, including
IP address, router and other options if the lease could not be renewed. In this state, the phone will
attempt to reach a DHCP server every 60 seconds. When a DHCP server becomes available and
a lease is renewed or new lease obtained, the phone performs a duplicate address detection on
the offered IP address. If no conflicts are detected, this IP address is assigned to the local network
interface for use.

Parameter configuration through DHCP

Avaya J100 Series IP Phones support the DHCP configuration option called Site Specific Option

(SSON). Using this option, custom parameters can be configured on the phone through a DHCP

server. In DHCP DISCOVER, the phone requests for the SSON, typically configured in DHCP

Option 242. To respond to this request, configure the DHCP server with proper data supplied in

the offer for this option value. The following is an example of such configuration:

option avaya-option-242 L2Q=1,L2QVLAN=1212,httpsrvr=192.168.0.100

The following parameters can be configured with this feature:

Parameter

Set to

DHCP lease
time

Option 51, if received

Table continues…

Configuration through DHCP

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

55

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов